0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
G3NA-425B-UTU-2 DC5-24

G3NA-425B-UTU-2 DC5-24

  • 厂商:

    OMRON(欧姆龙)

  • 封装:

    Hockey Puck

  • 描述:

    固态 SPST-NO(1 Form A) Hockey Puck

  • 数据手册
  • 价格&库存
G3NA-425B-UTU-2 DC5-24 数据手册
Solid State Relays G3NA The reliable choice for Hockey-puck-style Solid State Relays. Available in a Wide Range of Currents. • All models feature the same compact dimensions to provide a uniform mounting pitch. • Built-in varistor effectively absorbs external surges. • Operation indicator enables monitoring operation. • Protective cover for greater safety. • Certified by UL, CSA, and TÜV. Model Number Structure ■ Model Number Legend G3NA-@@@@@-@-@ 1 2 3 4 5 6 7 8 1. Basic Model Name G3NA: Solid State Relay 2. Load Power Supply Blank: AC output D: DC output 3. Rated Load Power Supply Voltage 2: 200 VAC or 200 VDC 4: 400 VAC 4. Rated Load Current Note: Not all combinations of current and voltage are available. 05: 5A 10: 10 A 20: 20 A 25: 25 A 40: 40 A 50: 50 A 75: 75 A 90: 90 A 5. Terminal Type B: Screw terminals 6. Zero Cross Function Blank: Equipped with zero cross function (AC-output models only) 7. Certification Blank: Models certified by UL and CSA UTU: Certified by UL, CSA, and TÜV 8. RoHS Conformance Blank: Non RoHS conformance (G3NA-275B, -290B, -425B, -450B, -475B, -490B series only) 2: RoHS conformance Solid State Relays G3NA 1 Ordering Information ■ List of Models Isolation Phototriac Zero cross function Yes Indicator Yes Photocoupler Phototriac Applicable output load (See note 1.) 5 A at 24 to 240 VAC (See note 2.) 10 A at 24 to 240 VAC (See note 2.) Photocoupler Phototriac 20 A at 24 to 240 VAC (See note 2.) Photocoupler Phototriac 40 A at 24 to 240 VAC (See note 2.) Photocoupler Phototriac 50 A at 24 to 240 VAC (See note.) Photocoupler Phototriac Rated input voltage Model 5 to 24 VDC G3NA-205B-UTU DC5-24 100 to 120 VAC G3NA-205B-UTU AC100-120 200 to 240 VAC G3NA-205B-UTU AC200-240 5 to 24 VDC G3NA-210B-UTU DC5-24 100 to 120 VAC G3NA-210B-UTU AC100-120 200 to 240 VAC G3NA-210B-UTU AC200-240 5 to 24 VDC G3NA-220B-UTU DC5-24 100 to 120 VAC G3NA-220B-UTU AC100-120 200 to 240 VAC G3NA-220B-UTU AC200-240 5 to 24 VDC G3NA-240B-UTU DC5-24 100 to 120 VAC G3NA-240B-UTU AC100-120 200 to 240 VAC G3NA-240B-UTU AC200-240 5 to 24 VDC G3NA-250B-UTU DC5-24 100 to 120 VAC G3NA-250B-UTU AC100-120 200 to 240 VAC G3NA-250B-UTU AC200-240 5 to 24 VDC G3NA-275B-UTU-2 DC5-24 100 to 120 VAC G3NA-275B-UTU-2 AC100-240 5 to 24 VDC G3NA-290B-UTU-2 DC5-24 100 to 240 VAC G3NA-290B-UTU-2 AC100-240 10 A at 200 to 480 VAC 5 to 24 VDC G3NA-410B-UTU DC5-24 100 to 240 VAC G3NA-410B-UTU AC100-240 25 A at 200 to 480 VAC 5 to 24 VDC G3NA-425B-UTU-2 DC5-24 100 to 240 VAC G3NA-425B-UTU-2 AC100-240 5 to 24 VDC G3NA-450B-UTU-2 DC5-24 100 to 240 VAC G3NA-450B-UTU-2 AC100-240 5 to 24 VDC G3NA-475B-UTU-2 DC5-24 100 to 240 VAC G3NA-475B-UTU-2 AC100-240 5 to 24 VDC G3NA-490B-UTU-2 DC5-24 100 to 240 VAC G3NA-490B-UTU-2 AC100-240 5 to 24 VDC G3NA-D210B-UTU DC5-24 100 to 240 VAC G3NA-D210B-UTU AC100-240 75 A at 24 to 240 VAC (See note 2.) Photocoupler G3NA-275B-UTU DC5-24 (See note 3.) G3NA-275B-UTU AC100-240 (See note 3.) Phototriac 90 A at 24 to 240 VAC (See note 2.) Photocoupler G3NA-290B-UTU DC5-24 (See note 3.) G3NA-290B-UTU AC100-240 (See note 3.) G3NA-425B-UTU DC5-24 (See note 3.) G3NA-425B-UTU AC100-240 (See note 3.) 50 A at 200 to 480 VAC G3NA-450B-UTU DC5-24 (See note 3.) G3NA-450B-UTU AC100-240 (See note 3.) 75 A at 200 to 480 VAC (See note 2.) G3NA-475B-UTU DC5-24 (See note 3.) G3NA-475B-UTU AC100-240 (See note 3.) 90 A at 200 to 480 VAC (See note 2.) G3NA-490B-UTU DC5-24 (See note 3.) G3NA-490B-UTU AC100-240 (See note 3.) --- 10 A at 5 to 200 VDC *All models are certified by UL, CSA, and TÜV. Note: 1. The applicable output load depends on the ambient temperature. Refer to Load Current vs. Ambient Temperature in Engineering Data. 2. Loss time increases under 75 VAC. (Refer to page 14.) Confirm operation with the actual load. 3. Discontinuation models in January 2012. (Non RoHS conformance models) 2 Solid State Relays G3NA ■ Accessories (Order Separately) One-touch Mounting Plates Model Mounting Bracket Model R99-12 FOR G3NA R99-11 Applicable SSR G3NA-240B-UTU, G3NA-250B-UTU, G3NA-450BUTU(-2) Heat Sinks Slim Models Enabling DIN-track Mounting Model Applicable SSR Y92B-N50 G3NA-205B-UTU, G3NA-210B-UTU, G3NA-D210B-UTU, G3NA-410B-UTU Y92B-N100 G3NA-220B-UTU, G3NA-425B-UTU(-2) Y92B-N150 G3NA-240B-UTU, G3NA-250B-UTU Y92B-P250 G3NA-450B-UTU(-2) Low-cost Models Model Applicable SSR Y92B-A100 G3NA-205B-UTU, G3NA-210B-UTU, G3NA-D210B-UTU, G3NA-220B-UTU, G3NA-410B-UTU, G3NA-425B-UTU(-2) Y92B-A150N G3NA-240-B-UTU Y92B-P250NF G3NA-275B-UTU(-2), G3NA-290B-UTU(-2), G3NA-475B-UTU(-2), G3NA-490B-UTU(-2) Solid State Relays G3NA 3 Specifications ■ Ratings Input (at an Ambient Temperature of 25°C) Model G3NA-2@@B-UTU Rated voltage Operating voltage Impedance (See note 1.) Voltage level Must operate voltage Must release voltage 5 to 24 VDC 4 to 32 VDC 15 mA max. (See note 2.) 4 VDC max. 100 to 120 VAC 75 to 132 VAC 36 kΩ±20% (See note 4.) 75 VAC max. (See note 3.) 20 VAC min. (See note 3.) 200 to 240 VAC 150 to 264 VAC 72 kΩ±20% 150 VAC max. (See note 3.) 40 VAC min. (See note 3.) (See note 5.) 4 to 32 VDC 7 mA max. (See note 2.) 4 VDC max. 75 to 264 VAC 72 kΩ±20% 75 VAC max. 4 to 32 VDC 15 mA max. (See note 2.) 4 VDC max. 1 VDC min. 75 to 264 VAC 72 kΩ±20% 20 VAC min. G3NA-4@@B-UTU(-2) 5 to 24 VDC 100 to 240 VAC G3NA-275B-UTU(-2) 5 to 24 VDC G3NA-290B-UTU(-2) 100 to 240 VAC G3NA-475B-UTU(-2) G3NA-490B-UTU(-2) G3NA-D210B-UTU(-2) 75 VAC max. 1 VDC min. 1 VDC min. 20 VAC min. Note: 1. The input impedance is measured at the maximum value of the rated supply voltage (for example, with the model rated at 100 to 120 VAC, the input impedance is measured at 120 VAC). 2. With constant current input circuit system. 3. Refer to Temperature Characteristics (for Must Operate Voltage and Must Release Voltage) in Engineering Data for further details. 4. The G3NA-240B-UTU is 72kΩ±20%. 5. The G3NA-240B-UTU is 20 VAC min. Output Model Applicable load Rated load voltage G3NA-205B-UTU 24 to 240 VAC Load voltage range 19 to 264 VAC G3NA-210B-UTU G3NA-410B-UTU 200 to 480 VAC 180 to 528 VAC Load current (See note 1.) With heat sink (See note 2.) Inrush current Without heat sink 0.1 to 5 A (at 40°C) 0.1 to 3 A (at 40°C) 60 A (60 Hz, 1 cycle) 0.1 to 10 A (at 40°C) 0.1 to 4 A (at 40°C) 150 A (60 Hz, 1 cycle) 0.2 to 10 A (at 40°C) 0.2 to 4 A (at 40°C) G3NA-220B-UTU 24 to 240 VAC 19 to 264 VAC 0.1 to 20 A (at 40°C) 0.1 to 4 A (at 40°C) G3NA-425B-UTU 200 to 480 VAC 180 to 528 VAC 0.2 to 25 A (at 40°C) 0.2 to 4 A (at 40°C) G3NA-240B-UTU 24 to 240 VAC 19 to 264 VAC 0.1 to 40 A (at 40°C) 0.1 to 6 A (at 40°C) G3NA-250B-UTU 24 to 240 VAC 19 to 264 VAC 0.1 to 50 A (at 40°C) 0.1 to 6 A (at 40°C) 220 A (60 Hz, 1 cycle) 440 A (60 Hz, 1 cycle) G3NA-450B-UTU(-2) 200 to 480 VAC 180 to 528 VAC 0.2 to 50 A (at 40°C) 0.2 to 6 A (at 40°C) G3NA-275B-UTU(-2) 24 to 240 VAC 19 to 264 VAC 1 to 75 A (at 40°C) 1 to 7 A (at 40°C) 800 A (60 Hz, 1 cycle) G3NA-475B-UTU(-2) 200 to 480 VAC 180 to 528 VAC 1 to 75 A (at 40°C) 1 to 7 A (at 40°C) 800 A (60 Hz, 1 cycle) G3NA-290B-UTU(-2) 24 to 240 VAC 19 to 264 VAC 1 to 90 A (at 40°C) 1 to 7 A (at 40°C) 1,000 A (60 Hz, 1 cycle) G3NA-490B-UTU(-2) 200 to 480 VAC 180 to 528 VAC 1 to 90 A (at 40°C) 1 to 7 A (at 40°C) 1,000 A (60 Hz, 1 cycle) G3NA-D210B-UTU(-2) 5 to 200 VDC 4 to 220 VDC 0.1 to 10 A (at 40°C) 0.1 to 4 A (at 40°C) 20 A (10 ms) Note: 1. The load current varies depending on the ambient temperature. Refer to Load Current vs. Ambient Temperature under Engineering Data. 2. When an OMRON Heat Sink (refer to Options) or a heat sink of the specified size is used. 4 Solid State Relays G3NA ■ Characteristics Item G3NA205BUTU G3NA210BUTU G3NA220BUTU G3NA240BUTU G3NA250BUTU G3NA- G3NA- G3NA- G3NA- G3NA- G3NA- G3NA410B425B450B275B290B475B490BUTU UTU(-2) UTU(-2) UTU(-2) UTU(-2) UTU(-2) UTU(-2) G3NAD210BUTU Operate time 1/2 of load power source cycle + 1 ms max. (DC input) 3/2 of load power source cycle + 1 ms max. (AC input) 1/2 of load power source cycle + 1 ms max. (DC input) 3/2 of load power source cycle + 1 ms max. (AC input) 1 ms max. (DC input) 30 ms max. (AC input) Release time 1/2 of load power source cycle + 1 ms max. (DC input) 3/2 of load power source cycle + 1 ms max. (AC input) 1/2 of load power source cycle + 1 ms max. (DC input) 3/2 of load power source cycle + 1 ms max. (AC input) 5 ms max. (DC input) 30 ms max. (AC input) Output ON 1.6 V (RMS) max. voltage drop 1.8 V (RMS) max. 1.6 V (RMS) max. 1.8 V (RMS) max. 1.5 V max. Leakage current 10 mA max. (at 200 VAC) 20 mA max. (at 400 VAC) 5 mA max. (at 100 VAC) 10 mA max. (at 200 VAC) 10 mA max. (at 200 VAC) 20 mA max. (at 400 VAC) 5 mA max. (at 200 VDC) 5 mA max. (at 100 VAC) 10 mA max. (at 200 VAC) Insulation 100 MΩ min. (at 500 VDC) resistance Dielectric 2,500 VAC, 50/60 Hz for 1 min strength 4,000 VAC, 50/60 Hz for 1 min 2,500 VAC, 50/60 Hz for 1 min Vibration Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) resistance Shock Destruction: 1,000 m/s2 resistance Ambient temperature Operating: –30°C to 80°C (with no icing or condensation) Storage: –30°C to 100°C (with no icing or condensation) Ambient humidity Operating: 45% to 85% Weight Approx. 60 g Approx. 70 g Approx. 80 g Approx. 120 g Solid State Relays Approx. 70 g G3NA 5 Engineering Data Load Current vs. Ambient Temperature G3NA-205B-UTU G3NA-210B-UTU G3NA-410B-UTU G3NA-220B-UTU G3NA-425B-UTU With standard heat sink (Y92B-A100 or Y92BN50) or aluminum plate measuring 75 mm x 75 mm x t3.2 mm (W x H x t) Without heat sink Load current (A) Load current (A) Load current (A) 20 16 10 With standard heat sink (Y92B-A100 or Y92BN50) or aluminum plate 8 measuring 150 mm x 150 mm x t3.2 mm (W x H x t) 6 5 With iron plate measuring 100 x 100 x t0.8 (W x H x t) 4 Without heat sink With standard heat sink (Y92B-A100 or Y92BN100) or aluminum plate measuring 200 mm x 200 mm x t3.2 mm (W x H x t) With iron plate measuring 100 x 100 x t0.8 (W x H x t) 2 Without heat sink 0 Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) G3NA-240B-UTU G3NA-250B-UTU G3NA-450B-UTU(-2) 60 50 45 50 20 With iron plate measuring 12 100 x 100 x t0.8 (W x H x t) 10 Without heat sink 6 4 2 0 −30−20 0 20 40 60 With standard heat sink (Y92B-P250) 40 30 20 10 6 80 0 −30 −20 100 0 20 G3NA-275B-UTU(-2) G3NA-475B-UTU(-2) G3NA-290B-UTU(-2) G3NA-490B-UTU(-2) 80 75 70 100 0.6°C/W with Heat Sink 50 40 Using the Y92B-P250NF 30 20 With iron plate measuring 100 x 100 x t0.8 (W x H x t) 12 10 7 Without heat sink 4A 20 −30−20 0 20 40 60 70 80 100 80 Load current (A) 60 60 80 100 G3NA-D210B-UTU 20 90 Ambient temperature (°C) 0.3°C/W with Heat Sink 70 60 50 Using the Y92B-P250NF 40 35 30 Solid State Relays G3NA 10 With standard heat sink (Y92B-A100 or Y92B-N50) or aluminum plate measuring 150 mm x 150 mm x t3.2 mm (W x H x t) 6 5 With iron plate measuring 100 x 100 x t0.8 (W x H x t) 4 Without heat sink With iron plate measuring 20 100 x 100 x t0.8 (W x H x t) 12 7 4A Without heat sink 20 −30 −20 0 20 40 60 70 80 100 Ambient temperature (°C) Note: The ambient operating temperature of the Y92B-P250NF is − 30 to 70°C. Be sure the operating temperature is within this range. 6 40 Ambient temperature (°C) Ambient temperature (°C) Load current (A) Without heat sink Load current (A) 30 With standard heat sink (Y92B-A150N or Y92B-N150) Load current (A) Load current (A) 40 2 0 −30 −20 0 20 40 60 80 Ambient temperature (°C) 100 One Cycle Surge Current The values shown by the solid line are for non-repetitive inrush currents. Keep the inrush current below the values shown by the dotted line if it occurs repetitively. 40 20 0 150 100 10 30 50 100 200 500 1,000 0 5,000 150 400 300 100 200 50 100 10 30 50 100 200 500 1,000 0 5,000 700 600 500 400 300 1,200 1,000 800 600 400 200 200 100 0 0 10 30 50 100 300 1,000 10 30 50 100 Temperature Characteristics (for Must Operate Voltage and Must Release Voltage) 300 20 0 3,000 2,000 Ambient 1,000 temperature 80°C −20 300 200 Aluminum plate 3.2 mm thick 30 20 −40 40 60 80 100 Ambient temperature (°C) 0 2 4 6 10 30 50 100 200 500 1,000 5,000 Energized time (ms) 26 24 22 20 18 16 14 12 10 8 6 4 2 0 10 20 30 50 70 100 200 300 500 1,000 2,000 Energized time (ms) Note: The heat sink area refers to the combined area of the sides of the heat sink that radiate heat. For example, when a current of 18 A is allowed to flow through the SSR at 40°C, the graph shows that the heat sink area is about 450 cm2. Therefore, if the heat sink is square, one side of the heat sink must be 15 cm ( 450 (cm2)/2 ) or longer. 8 10 12 14 16 18 20 22 24 Load current (A) Thermal Resistance Rth (Back of Junction SSR) (Examples) Model 0 Ambient temperature 40°C 1,000 700 500 100 70 50 20 5,000 G3NA-220B-UTU Heat sink area (cm2) 40 0 1,000 Heat Sink Area vs. Load Current G3NA-2@@B-UTU AC input −20 500 30 28 Energized time (ms) Energized time (ms) −30 100 200 G3NA-D210B Inrush current (A peak) Inrush current (A peak) 800 30 50 Energized time (ms) G3NA-290B-UTU(-2) G3NA-490B-UTU(-2) 900 10 Energized time (ms) G3NA-275B-UTU(-2) G3NA-475B-UTU(-2) Inrush current (A peak) 200 50 Energized time (ms) Variation rate (%) G3NA-240B-UTU/250B-UTU G3NA-450B-UTU Inrush current (A peak) Inrush current (A peak) Inrush current (A peak) 60 G3NA-220B-UTU G3NA-425B-UTU Inrush current (A peak) G3NA-210B-UTU G3NA-410B-UTU G3NA-205B-UTU Thermal Resistance Rth of Heat Sinks (Examples) Rth (°C/W) Model Rth (°C/W) G3NA-205B-UTU 3.22 Y92B-N50 2.8 G3NA-210B-UTU 2.62 Y92B-N100 1.63 G3NA-220B-UTU 1.99 Y92B-N150 1.38 G3NA-240B-UTU 0.45 Y92B-A100 1.63 G3NA-250B-UTU 0.45 Y92B-A150N 1.37 G3NA-275B-UTU G3NA-475B-UTU G3NA-290B-UTU G3NA-490B-UTU 0.45 Y92B-A250 1.00 Y92B-P250NF 0.46 G3NA-D210B-UTU 2.62 Note: When using a commercially available heat sink, use one with a thermal resistance equal to or less that the OMRON Heat Sink. Solid State Relays G3NA 7 Dimensions ■ Relays Note: All units are in millimeters unless otherwise indicated. G3NA-205B-UTU, G3NA-210B-UTU, G3NA-220B-UTU, G3NA-410B-UTU, G3NA-425B-UTU 11.9 4.5 dia. Mounting Holes Four, M4 x 8 screws Terminal Arrangement/ Internal Connections (Top View) Two, 4.3-dia. or M4 holes Load Load power supply 58 max. 47.5 44 Output 1 2 (−) 4 (+) 3 47.6±0.2 4.5 25 43 max. Operating indicator 13.8 *18.9 25 max. *28 max. 27 max. *30 max. Input *Size for G3NA-410B-UTU and G3NA-420B-UTU. G3NA-240B-UTU, G3NA-250B-UTU, G3NA-450B-UTU(-2) 11.9 4.5 dia. Terminal Arrangement/ Internal Connections (Top View) Mounting Holes Two, M5 x 12 screws Two, 4.3-dia. or M4 holes Load Load power supply 58 min. 47.5 44 Output 1 2 (−) 4 (+) 3 47.6±0.2 Operating indicator 4.5 25 43 max. Two, M4x8 13.8 *18.9 25 max. *28 max. 27 max. *30 max. Input *Size for G3NA-240B-UTU, and G3NA-450B-UTU-2. G3NA-275B-UTU(-2), G3NA-475B-UTU(-2), G3NA-290B-UTU(-2), G3NA-490B-UTU(-2) 4.5 dia. Two, M5 x 12 screws 12 Mounting Holes Two, 4.3-dia. or M4 holes Terminal Arrangement/ Internal Connections (Top View) Load 58 max.47.5 44 Output 4.5 8.2 25 43 max. Operating indicator Two, M4 x 8 screws 1 47.6±0.2 16.8 26 max. 28 max. *18.9 *28 max. *30 max. (−) 4 2 Input Load power supply (+) 3 *Size for G3NA-@@@B-UTU-2. G3NA-D210B-UTU Note: The load can be connected to either the positive or negative side. 11.9 Four, M4 x 8 4.5 dia. screws Mounting Holes Terminal Arrangement/ Internal Connections (Top View) Two, 4.3-dia. or M4 holes Load 58 max. 47.5 44 Output 47.6±0.2 4.5 25 43 max. 8 Load power supply Solid State Relays G3NA Operating indicator 13.8 25 max. 27 max. 1 − 2 + (−) 4 (+) 3 Input Note: When connecting the load, either the positive or negative side of the load terminals can be connected. ■ Options (Order Separately) To mount the Relay to DIN Track, first mount it to the One-touch Mounting Plate and then attach it to the DIN Track as shown in the diagram. One-touch Mounting Plate The One-touch Mounting Plate is used to mount the GN3A to a DIN Track. R99-12 FOR G3NA (for the G3NA and G3NE) Two, M4 mounting holes for the G3NA To remove the Relay from the DIN Track, pull down on the tab with a screwdriver in the direction of the arrow. 30 44 Two, M4 mounting holes for the G3NE • When a Relay is mounted to DIN Track, use it within the rating for a Relay without a heat sink. • Use the following DIN Tracks: PFP-100N or PFP-100N2. Mounting Bracket R99-11 (for the G3NA-240B-UTU, G3NA-250B-UTU, G3NA-450B-UTU(-2)) Use Mounting Bracket R99-11 so that the G3NA-240B/-250B/-450B-UTU can be mounted with the same pitch as that of the G3N-240B. 16 8 5 12.5 56 21 4 4.6 Heat Sinks Y92B-N50 Heat Sink (for the G3NA-205B-UTU, G3NA-210B-UTU, G3NA-410B-UTU, G3NA-D210B-UTU) For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs). The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting hole dimensions. Mounting Holes 4.6 dia. Two, 4.4-dia. or M4 holes Two, M3 holes Two, 3.2-dia. holes Two, M4 holes 44 max. 30 35 30.5±0.3 47.6 77 max. 90±0.3 100 max. 5.6 5 47 max. 6 90±0.4 4.5 51 max. 35±0.2 Weight: approx. 200 g Solid State Relays G3NA 9 Y92B-N100 Heat Sink (for the G3NA-220B-UTU, G3NA-425B-UTU) For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs). The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting hole dimensions. Mounting Holes Two, M4 4.6 dia. Two, M3 holes holes Two, 3.2-dia. holes Two, 4.4-dia. or M4 holes 71 max. 30 35 30.5±0.3 75 max. 90±0.4 47.6 77 max. 90±0.3 5.6 28 13 5 100 max. 4.5 100 max. 35±0.2 Weight: approx. 400 g Y92B-N150 Heat Sink (for the G3NA-240B-UTU) For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs). The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting hole dimensions. Mounting Holes Two, 3.2-dia. holes 47.6 35 100 max. 30 56±0.3 77 max. 90±0.3 100 max. 10 Two, 4.4-dia. or M4 holes Three, M4 holes 4.6 dia. Solid State Relays G3NA 5.6 104 max. 28 5 100 max. 13 4.5 Weight: approx. 560 g Y92B-P250 (for the G3NA-250B-UTU, G3NA-450B-UTU(-2)) Two, M4 Depth10 Four, M4 Mounting Holes Four, 4.5 dia. or M4 47.6 190.5 max. Four, R2.5 130.5 max. 70 max. Y92B-A100 Low-cost Heat Sink (for the G3NA-205B-UTU, G3NA-210B-UTU, G3NA-220B-UTU, Y92B-A150N Low-cost G3NA-410B-UTU, Heat Sink G3NA-425B-UTU(-2), (for the G3NA-240B-UTU) G3NA-D210B) Three, M4 holes 90±0.1 90±0.1 Two, M4 holes R2.2 102 max. 80.5 max. 1.5 47.6 9.6 2 50±0.1 56±0.5 47.6 50±0.1 150 max. 100 max. Weight: approx. 210 g 1.5 30 45.5 max. Weight: approx. 310 g Mounting Holes Y92B-A100 Y92B-A150 Four, 4.3-dia. or M4 holes For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs). The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting hole dimensions. Solid State Relays G3NA 11 Safety Precautions !CAUTION Touching the charged section may occasionally cause minor electric shock. Do not touch the G3NA terminal section (the charged section) when the power supply is ON. Be sure to attach the cover before use. The G3NA and heat sink will be hot and may occasionally cause minor burns. Do not touch the G3NA or the heat sink either while the power supply is ON, or immediately after the power is turned OFF. The internal snubber circuit is charged and may occasionally cause minor electric shock. Do not touch the G3NA's main circuit terminals immediately after the power is turned OFF. Be sure to conduct wiring with the power supply turned OFF, and always attach the terminal cover after completing wiring. Touching the terminals when they are charged may occasionally result in minor electric shock. • Abnormal heat generated by terminals may occasionally result in fire damage. Do not operate if the screws on the output terminal are loose. Tightening Torque Screw size Tightening torque M4 1.2 N⋅m M5 2.0 N⋅m • Abnormal heat generated by terminals may occasionally result in fire damage. When tightening terminal screws, be sure that no non-conductive foreign matter is caught in screw. • For GN3A Relays of 40 A or higher, use crimp terminals of an appropriate size for the wire diameter for M5 terminals. • Do not use any wires with damaged sheaths. These may cause electric shock or leakage. • Do not place wiring in the same conduit or duct as high-voltage lines. Induction may cause malfunction or damage. Do not apply a short-circuit to the load side of the G3NA. The G3NA may rupture. To protect against short-circuit accidents, install a protective device, such as a quickburning fuse, on the power supply line. • Use wires of an appropriate length, otherwise malfunction and damage may result due to induction. ■ Precautions for Safe Use • Be sure that the G3NA clicks into place when mounting it to DIN Track. The G3NA may fall if it is not mounted correctly. Although OMRON continuously strives to improve the quality and reliability of our relays, the G3NA contains semiconductors, which are generally prone to occasional malfunction and failure. Maintaining safety is particularly difficult if a relay is used outside of its ratings. Always use the G3NA within the rated values. When using the G3NA, always design the system to ensure safety and prevent human accidents, fires, and social damage even in the event of G3NA failure, including system redundancy, measures to prevent fires from spreading, and designs to prevent malfunction. 1. G3NA malfunction or fire damage may occasionally occur. Do not apply excessive voltage or current to the G3NA terminals. 2. Heat Dissipation • Do not obstruct the airflow to the G3NA or heat sink. Heat generated from an G3NA error may occasionally cause the output element to short, or cause fire damage. • Be sure to prevent the ambient temperature from rising due to the heat radiation of the G3NA. If the G3NA is mounted inside a panel, install a fan so that the interior of the panel is fully ventilated. • Mount the G3NA in the specified orientation. If the G3NA is mounted in any other orientation, abnormal heat generation may cause output elements to short or may cause burning. • Do not use the G3NA if the heat sink fins are bent, e.g., as the result of dropping the G3NA. Heat dissipation characteristics will be reduced, possibly causing G3NA failure. • Apply a thin layer of Momentive Performance Materials’s YG6260 or Shin-Etsu Chemical’s G747, or a similar product to the heat sink before mounting • If a material with high thermal resistance, such as wood, is used, heat generated by the G3NA may occasionally cause fire or burning. When installing the G3NA directly into a control panel so that the panel can be used as a heat sink, use a panel material with low thermal resistance, such as aluminum or steel. • Use the specified heat sink or one with equivalent or better characteristics. 3. Wire the G3NA and tighten screws correctly, observing the following precautions Heat generated by a terminal error may occasionally result in fire damage. Do not operate if the screws on the output terminal are loose. • Abnormal heat generated by wires may occasionally result in fire damage. Use wires suitable for the load current. 12 Solid State Relays G3NA • Mount the DIN Track securely. Otherwise, the DIN Track may fall. • Do not mount the G3NA when your hands are oily or dirty, e.g., with metal powder. These may cause G3NA failure. • Tighten the G3NA screws securely. Tightening torque: 0.78 to 0.98 N⋅m • Tighten the heat sink screws securely. Tightening torque: 0.98 to 1.47 N⋅m 4. Preventing Overheating When using the High-capacity Heat Sink (Y92B-P250NF), always use a thermostat or other method to protect from overheating in the event that the fan stops. 5. Do Not Touch Fan Blades When the fan is operating, do not touch the fan blades with any part of your body or allow foreign matter to come into contact with the blades. Always attach the enclosed finger guard when using the G3NA. 6. Operating Conditions • Only use the G3NA with loads that are within the rated values. Using the G3NA with loads outside the rated values may result in malfunction, damage, or burning. • Use a power supply within the rated frequency range. Using a power supply outside the rated frequency range may result in malfunction, damage, or burning. 7. Do not transport the G3NA under the following conditions. Failure or malfunction may occur. • Conditions under which the G3NA will be exposed to water • High temperatures or high humidity • Without proper packing Operating and Storage Locations Relationship between SSRs and Duct Height Do not use or store the G3NA in the following locations. Doing so may result in damage, malfunction, or deterioration of performance characteristics. Incorrect Example Duct Mounting surface Mounting surface Vertical direction Airflow Base Duct Duct Do not surround the SSR with ducts, otherwise the heat radiation of the SSR will be adversely affected. Countermeasure 2 50 mm max. (A height of no more than half the SSR's height is recommended.) Duct Mounting surface • Do not use or store in locations subject to direct sunlight. • Do not use in locations subject to ambient temperatures outside the range –20 to 60°C. • Do not use in locations subject to relative humidity outside the range 45% to 85% or locations subject to condensation as the result of severe changes in temperature. • Do not store in locations subject to ambient temperatures outside the range –30 to 70°C. • Do not use or store in locations subject to corrosive or flammable gases. • Do not use or store in locations subject to dust (especially iron dust) or salts. • Do not use or store in locations subject to shock or vibration. • Do not use or store in locations subject to exposure to water, oil, or chemicals. • Do not use or store in locations subject to high temperatures or high humidity. • Do not use or store in locations subject to salt damage. • Do not use or store in locations subject to rain or water drops. Countermeasure 1 Duct Use short ducts. If the ducts cannot be shortened, place the SSR on a metal base so that it is not surrounded by the ducts. Ventilation Outside the Control Panel Be aware of airflow Duct Ventilation outlet (axial fan) ■ Precautions for Correct Use Please observe the following precautions to prevent failure to operate, malfunction, or undesirable effect on product performance. Before Actual Operation 1. The G3NA in operation may cause an unexpected accident. Therefore it is necessary to test the G3NA under the variety of conditions that are possible. As for the characteristics of the G3NA, it is necessary to consider differences in characteristics between individual SSRs. 2. Unless otherwise specified, the ratings in this catalog are tested values in a temperature range between 15°C and 30°C, a relative humidity range between 25% and 85%, and an atmospheric pressure range between 88 and 106 kPa (standard test conditions according to JIS C5442). It will be necessary to provide the above conditions as well as the load conditions if the user wants to confirm the ratings of specific G3NAs. Mounting Method SSR Mounting Pitch (Panel Mounting) Duct 60 mm min. Air inlet If the air inlet or air outlet has a filter, clean the filter regularly to prevent it from clogging to ensure an efficient flow of air. Do not locate any objects around the air inlet or air outlet, otherwise the objects may obstruct the proper ventilation of the control panel. A heat exchanger, if used, should be located in front of the SSRs to ensure the efficiency of the heat exchanger. • Please reduce the ambient temperature of SSRs. The rated load current of an SSR is measured at an ambient temperature of 40°C. • An SSR uses a semiconductor in the output element. This causes the temperature inside the control panel to increase due to heating resulting from the passage of electrical current through the load. To restrict heating, attach a fan to the ventilation outlet or air inlet of the control panel to ventilate the panel. This will reduce the ambient temperature of the SSRs and thus increase reliability. (Generally, each 10 °C reduction in temperature will double the expected life.) Load current (A) 5A Required number 0.08 of fans per SSR 10 A 20 A 40 A 50 A 75 A 90 A 0.16 0.31 0.62 0.8 1.2 1.44 Vertical direction 30 mm min. 80 mm min. Example: For 10 SSRs with load currents of 10 A, 0.16 × 10 = 1.6 Thus, 2 fans would be required. Size of fans: 92 mm2, Air volume: 0.7 m3/min, Ambient temperature of control panel: 30 °C If there are other instruments that generate heat in the control panel other than SSRs, additional ventilation will be required. Solid State Relays G3NA 13 EMC Directive Compliance (For -UTU type) EMC direcives can be complied with under the following conditions. 1. AC-switching models • A capacitor must be connected to the input power supply. • A capacitor, varistor and toroidal core must be connected to the load power supply. • The input cable must be less than 3 m. Load 3 m max. G3NA Connect a quick-break fuse in series with the load as a short-circuit protection measure. Use one of the fuses in the following table or one with equivalent or better characteristics. Recommended Fuses G3NA rated load current Troidal core Input Fuses Output Recommended Capacitor : 0.05µF, 500 VAC (Load) 0.1µF, 250 VAC (Input) Recommended Varistor : 470 V, 1750 A Recommended Troidal core : NEC/TOKIN:ESD-R-25B or equivalent 2. DC-switching models Less than 3 m 5A 60LFF5 8A 60LFF8 10 A 60LFF10 • The input cable must be less than 3 m. Loss Time The loss time will increase when the G3NA is used at a low applied voltage or current. Be sure that this does not cause any problems. Using DC Loads For a DC or L load, a diode should be connected in parallel the load to absorb the counter electromotive force of the load. Load 14 HINODE ELECTRIC CO.,LTD. Applicable SSR G3NA-205B-UTU G3NA-210B-UTU 60LFF15 20 A 60LFF20 50SHA20 G3NA-220B-UTU 25 A 60PFF25 50SHA25 G3NA-240B-UTU 30 A 60PFF30 50SHA30 G3NA-250BUTU 40 A 50SHA40 45 A 50SHA45 50 A 50SHA50 75 A 50SHA75 G3NA-275B-UTU(-2) 80 A 50SHA80 G3NA-290B-UTU(-2) 100 A 50SHB100 Reverse Connection The output terminal side of the G3NA-D210B is connected to a builtin diode to protect the SSR from damage that may result from reverse connection. The SSR, however, cannot withstand one minute or more if the wires are connected in reverse. Therefore, pay the utmost attention not to make polarity mistakes on the load side. Loss time Input Manufacturer 15 A Load Input G3NA-UTU Output Fuse model SSR Solid State Relays G3NA Load power supply ■ Precautions on Operating and Storage Environments 1. Operating Ambient Temperature 3. Vibration and Shock The rated value for the ambient operating temperature of the G3NA is for when there is no heat build-up. For this reason, under conditions where heat dissipation is not good due to poor ventilation, and where heat may build up easily, the actual temperature of the G3NA may exceed the rated value resulting in malfunction or burning. Do not subject the G3NA to excessive vibration or shock. Otherwise the G3NA may malfunction and internal components may be deformed or damaged, resulting in failure of the G3NA to operate. When using the G3NA, design the system to allow heat dissipation sufficient to stay below the Load Current vs. Ambient Temperature characteristic curve. Note also that the ambient temperature of the G3NA may increase as a result of environmental conditions (e.g., climate or air-conditioning) and operating conditions (e.g., mounting in an airtight panel). To prevent the G3NA from abnormal vibration, do not install the G3NA in locations or by means that will subject it to vibration from other devices, such as motors. 4. Solvents Do not allow the G3NA or the resin portion of the Fan’s thermostat to come in contact with solvents, such as thinners or gasoline. Doing so will dissolve the markings on the G3NA. 2. Transportation 5. Oil When transporting the G3NA, observe the following points. Not doing so may result in damage, malfunction, or deterioration of performance characteristics. Do not allow the G3NA terminal cover to come in contact with oil. Doing so will cause the cover to crack and become cloudy. • • • • Do not drop the G3NA or subject it to severe vibration or shock. Do not transport the G3NA if it is wet. Do not transport the G3NA under high temperatures or humidity. Do not transport the G3NA without packing it properly. ■ Operation 1. Leakage Current 2. Screw Tightening Torque A leakage current flows through a snubber circuit in the G3NA even when there is no power input. Therefore, always turn OFF the power to the input or load and check that it is safe before replacing or wiring the G3NA. Tighten the G3NA terminal screws properly. If the screws are not tight, the G3NA will be damaged by heat generated when the power is ON. Perform wiring using the specified tightening torque. 3. Handling Relays Varistor Trigger circuit Input circuit Switch element Snubber circuit Do not mount the G3NA when your hands are oily or dirty, e.g., with metal powder. These may cause G3NA failure. Leakage current 4. Do Not Drop Be careful not to drop a Relay or Heat Sink onto any part of your body while working. Injury may result. This is particularly true for the High-capacity Heat Sink (Y92B-P250NF), which weighs 2.5 kg. Solid State Relays G3NA 15 Warranty and Application Considerations Read and Understand this Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it will be used. Know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Disclaimers PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult with your OMRON representative at any time to confirm actual specifications of purchased product. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. J166-E1-03 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company Control Devices Division H.Q. Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81)75-344-7109/Fax: (81)75-344-7149 1210
G3NA-425B-UTU-2 DC5-24 价格&库存

很抱歉,暂时无法提供与“G3NA-425B-UTU-2 DC5-24”相匹配的价格&库存,您可以联系我们找货

免费人工找货